|
|||
|
|||
Just recently CommitCRM hangs-up at the stage in Backup when it says "login other users off in (blank) minutes". I set it to 1 minute and it just hangs up there and never gets to step 2 which is the actual backup. Backups always went smoothly before. what gives?
Carmen carmen@risingicon.com |
|
|||
|
|||
Hi Carmen,
thanks for letting us know about this issue. I believe we have heard similar report on this in the past, and would like to better investigate this. Two things which will help us: 1) Please send us your RangerMSP log files (via Help > Technical Support) directly, and we will have a look at this. 2) Have you tried manually quitting all RangerMSP clients prior to performing the backup? Does this make a difference? We are trying to determine whether this happens only when actually trying to quit the clients via the backup tool. Thanks, Dina |
|
|||
|
|||
We have been unable to do a backup. The backup hangs at Step One. Rebooting the server does not work. Manually disconnecting does not work. Please advise. I don't know if this is the cause, but we have not been able to run the backup since the recent upgrade to v5.1.
|
|
|||
|
|||
Hi midnightblue,
Thanks for reporting this. I'm not sure what may cause this behavior. First, I'd like to suggest some ideas, and if this will not help, we will move on from there. Please try the following: 1) Stop all RangerMSP clients 2) Stop RangerMSP Web Interface service and RangerMSP Server service (if running) 3) Leave your Advantage service running (if using CSD) 4) Run the backup using the external program from: <server>\RangerMSP\Utils\RangerMSPBackup.exe If this still does not work for you, we will need you to contact us directly and send us the RangerMSP log files so we will be able to further investigate this. You can send us the logs via the Help > Technical Support menu in the RangerMSP client. Let us know how it goes, Reno |
|
|||
|
|||
First, my primary issue is that I cannot stop the CommitCRM clients. The utility hangs at Step One. I have tried stopping the services using the above steps and then running the backup utility from the folder. It still hangs at Step One. I am able to click on the Enable button in Step Three to resume use of CommitCRM.
I am trying to send the logs. When I select that option from within CommitCRM, it gives me an Error - "Failed sending Email". My Outlook is open and connected to CommitCRM, the sync is configured. |
|
|||
|
|||
How do you send the logs if you have no email client installed? Is the only way to manually compress and email them?
- we are having the same problem, our first backup attempt. We are attempting to stop the services first and do it from the program, but its taking a awfully long time. We have multiple servers, can we just backup the db folder? Does that do a full backup as well? |
|
|||
|
|||
The system never did stop the CommitCRM server, it timed out and now just says "stopping". No options to manually restart. We will have to see if a command prompt will do it. We stopped the web service then the backup ran successfully. We restarted the web service and are trying to restart the server service. Hopefully we don't have to restart the server, we use other programs on that server. |